Physical AI Lab // Episode 4.1 // One-pager

Body and supply chain: actuators, BOM, cost curves

A large share of a robot's cost goes into its joint actuators

Three key points

  1. A humanoid robot's "body" is at heart dozens of actuators: officially 23–43 joint motors on the Unitree G1 (O), and 28–44 on a humanoid robot per an industry report (M); each actuator = motor + gearbox + sensing + control.
  2. Actuators are about forty to sixty percent of the bill of materials (BOM), a large slice (per an industry report, M); so for body cost, look at the actuators first.
  3. Cheaper products have appeared: the Unitree G1 cost about $16,000 at launch, far cheaper than a larger humanoid from the same maker (reported, M); these are two different products, and the G1 is also much smaller, so this is not one product's price falling over time. In the same report Unitree credits fewer wires, chips and screws, and its own motor and gearbox designs. But cheap ≠ works well, peak ≠ everyday, and cost breakdowns are mostly analyst estimates.

Evidence: O official · R research · M media

O23–43joint motors in the Unitree G1 humanoid robot (official spec, depends on configuration)
M28–44actuators on one humanoid robot (per an industry report, analyst figures)
M40%–60%is the actuators' share of a humanoid robot's bill of materials (BOM) (per an industry report, analyst estimate)
MAbout $16,000is the Unitree G1's base-configuration list price, about $16,000, at its May 2024 launch (per trade press); the same maker's larger H1 had a base price of about $90,000

Further reading